BroadBeam/Dutch Barge Hybrid Systems


Our parallel hybrid systems provide the best feature/cost performance of all the competing hybrid configurations (see discussion Which Hybrid is Best?). An integrated Hybrid system has been designed to provide a complete power and propulsion solution.

The hybrid system does not disturb the normal shaft / propeller connection to the diesel, instead as the name implies it connects to the shaft in parallel with the standard diesel engine. Hybrid systems have the most to offer in efficiency improvements during low to mid power cruising and our system makes best use of this basic principle. The standard diesel engine is sized to provide the maximum power requirement for the vessel, while the electric drive is designed to match the boats mid range power needs. This allows the electric drive components to be smaller and provides a very cost effective hybrid solution. See this series of articles for a full description of system capabilities and performance.

Hybrid Marine has been suppling Hybrid packages for Broadbeams and Dutch barges since 2012 and has many satisfied customers. Take a look at our Case Studies for further information.

Beta 105T green

Hybrid 4045 9891 3 455

Beta Marine 105
with 20kW Hybrid

Shire 90 with 20kW Hybrid


System overview

It takes approximately 5 to 10kW to move an average 35T Broadbeam boat at moderate canal speeds (3 to 4 MPH). The 20kW "V twin" electric motor provides this with plenty to spare for normal manoeuvring. If you are operating in adverse conditions, say crossing the channel or on a fast flowing stretch of a river, then you will need the full power of the main engine.

Typically the engine is running at just over tick over speeds (1,200 to 1,400 RPM) in restricted waters. The canal boat hybrid is designed specifically to provide up to 12 kW of power generation when cruising at this low engine speed.

In normal calm canal conditions you can drive on the electric motor for prolonged periods. How long you can go on electric drive depends on the size of your batteries. A 48V / 800Ah battery bank would last around 3 to 5 hours. Keep in mind this is continuous operation. If you are transiting a flight of locks then you are only using electrical energy when moving. This eliminates idling the engine in locks and provides considerable savings in fuel.

When the batteries run down, you start the engine and drive in the normal way. At this time the hybrid automatically becomes a generator to recharge the batteries. At typical propulsion speeds the batteries are quickly recharged via the powerful  hybrid generator and boost alternator bank. Every hour of engine drive can store enough energy in the batteries to travel between 1 and 1.5 hours in electric drive.

After the batteries are recharged you can go back to electric drive or save the energy stored for powering your electrical circuits in the evening. 




System Features and functions

  • Whisper quiet electric operation yet the vessels standard diesel engine remains available to meet high end power requirements.
  • Listen to the leaves rustling in the trees and observe the wildlife as never before.
  • No more idling in locks, you can breathe fresh air and actually hear your crew from the bottom of the lock
  • Charge with the hybrid when on the move.
  • In the evening power your entire boa,t in complete silence, with the large inverter and high capacity battery bank.
  • No more engine charging in the morning/evening to top up substandard 12V batteries.
  • Cook electric in complete silence and eliminate gas onboard.
  • Significant reduction in fuel consumption and engine hours.
  • Build your hybrid canal boat for very little extra.

 Beta Broad beam 20kW Hybrid rev2


Hybrid package components
Marine diesel engine, Beta 75, to 150 or Shire 70 to 160
Liquid cooled, brushless, "V Twin" motor/generator, 20kW electric drive and 10-12kW generation
Standard marine gear box, PRM500
Boost alternator bank, provides an extra 5kW of charging for the 48V battery. Boosts charge rate up to 15kW
Standard 6" coupling to propeller shaft
Smart Morse control. Normal Morse cable connection to engine (not supplied),  sensor for control of hybrid in electric drive.
Hybrid control box (x2), Motor speed/direction control, multi phase battery charging when engine is running
Hybrid colour display
Charger/Inverter.  5kVA  (electric cooking)
48V, 800Ah Battery bank, supplies both propulsion and house loads.
Cross charger for buffer battery supplying on board 12V appliance
Not supplied with package
Renewable charging sources , Wind, Solar etc
Standard 230V domestic appliances driven by the high power inverter


Download a brochure  Beta packages  or Shire packages

Contact us to discuss your requirements

11 Melville Street, Sandown, Isle Of Wight, PO36 8LF

© MMXX Hybrid Marine